|
|
Features: |
| |
-
Many patents design with wide
acceptance. Applicable to coins
or substitute coins of different
countries.
-
Mechanical manual operation, no
power required. fast counting
energy saving effect, may
achieve the number of counting
as high as 800 pieces per
minute.
-
The small size is convenient to
carry on, Excellent features,
accurate counting and selection
of coins by comparison type,
Four digits counter is able to
resume to zero.
|
Specifications:
|
|
Coin |
Applicable to all kinds of
domestic or foreign coin or
substitute coin. [Diameter
limit:Ø20mm~Ø29mm]
[Thickness limit:1mm~2.6mm] |
|
Counting Speed |
About 800 pieces (minute) |
|
Counting Way |
Mechanical type calculating
method |
|
Back to Zero Method |
By pressing button |
|
Number of Counting Digit |
Four digits. (up to 9999
pieces) |
|
Coin Selection |
By analogy method |
|
Way of fixing |
Use a fixing device to fix
on the table top |
|
Operation method |
Manual |
|
Total weight |
4.2kgs (Approx. 9
lbs.) |
| |
|
|
Open the cover of the main
body, pour the coins to be
counted on to the cover. |
|
Push the pressing handle of
the counter to make it back
to zero. (Upon operation
completed, the number
displayed on the counter is
the actual amount of the
coins. |
 |
Selection of coin diameter:
1.Turn the screw nut
counter-clockwise.
2.push the coin adjustment
block to the right.
3.Put in one coin to be
counted first.
4.After loosen up the coin
adjustment block, it will
jump back close to the coin.
5.Lock up the screw nut in
clockwise direction and fix
it.
|
 |
Selection of coin thickness:
Turn the coin thickness
adjustment knob clockwise to
make the coin thickness
block higher, lower if turn
counter clockwise. The
appropriate hight shall be
allowed one coin to pass
through as principle. Too
high will block the coin,
while too low will make coin
unable to come out.
|
 |
Push the coins on the top
cover on to the turn table,
shake the turn handle at the
same time to enable coins to
come out normally. (Keep the
coins inside the turn table
less than 1/2 to make the
turning much smooth).
|
|
|
